Our Price: £10.50

GWS BLM001 BRUSHLESS MOTOR

GWS BLM001 BRUSHLESS MOTOR

<NO LOAD>

< Performance Reports with GWS Propellers >

GWS 2205/15T Brushless Motor Instructions︰
Be sure to follow the notes as below:
1. Its KV value is 1300.
2. Never let it run continually for over than 5 minutes when its power reaches 90W.
Never let it run continually for over than 10 seconds when its power reaches 140W.
3. It is recommended to use this motor on 3D airplane with its total flying weight less than 350g (12.36 oz).
4. It is required to keep good ventilation for this motor during its running hours.
5. This motor could not work when its temperature goes higher than 70oC (158oF )
6. Its temperature will go higher than 40oC (104oF ) very quickly when its power reaches 90W.
7. Using propeller longer than 8040 (8"x4") on this motor is not recommended, this motor has been tested to work well with
2S 7.4V Li-Po battery pack, and it is strongly recommended to use only 2S 7.4V Li-Po battery pack with this motor.
8. It is not recommended to reach current drawing over than 12A when 2S 7.4V LiPo battery pack is applied with this motor.


Extra notes needs to be taken seriously on all makes and models of brushless motors:
It is Strongly Recommended to Take Great Care when using propeller size in 8043 (8"x4.3") on this motor as the current (Amp.) drawing would be over its Maximum Limitation quickly when high R.P.M. applied.

« Back